How to use a heavy stapler

1. When binding, turn the presser wheel clockwise to raise the presser foot, put the binding material under the presser foot, loosen the presser wheel at the selected position and automatically press it, and then turn the presser wheel counterclockwise to rotate about 180° and lock , And then turn the staple handle counterclockwise to pass the staple through the material. When it penetrates into place, the guide arm will automatically hang the thread in the thread groove of the staple hook. At this time, lift up the handle. When the staple is retracted, the binding line will follow the binding material and loosen in a clockwise direction. Press the caster hand wheel to complete one stitch binding, repeat the above steps, and complete the binding task immediately.

2. Needle up method Loosen the fixing screw on the needle buckle, remove the needle buckle, hang the needle tail hook into the needle fixing hole, keep it vertical, and put the needle buckle into the original position of the needle buckle. Tighten the fixing screw on the needle catcher.