Instructions For The Correct Use Of Paint Pens

1. For paint pens, or valve markers, shake the pen body several times before using, and mix the ink evenly;

2. Place the pen tip up, press the pen tip lightly for 3-4 seconds and then release it to release the air in the pen tube (the new pen is in a completely sealed state, there is a lot of air in the pen tube, and the pressure is too large to cause the ink to spray out during use);

3. Press the pen tip down on the paper several times, or do not loosen it until the ink oozes to the tip of the pen, you can use it. Note that you don't need to press it when using it to prevent the ink from oozing too much;

4. Keep the cap tightly closed after writing. After a long period of time, the pen tip may become dry and blocked. You can press the pen tip several times, and the overflowing ink can dissolve the pen tip and use it (it is also not advisable to press too much to prevent ink leakage)

5. If it is left for too long and the nib can not produce water normally, you can replace the nib to use the ink in the pen normally.