How To Remove Adhesive of Tape

Most of us must have used tape as a tool, it can help us stick things, repair holes, packaging shell, etc., in life is used a lot. However, when you try to take the tape off, you always leave a mark on the surface, and if you don't clean it, over time the mark of the glue will become dirty and black. Do you know what to do with them?

1. Method of removing self-adhesive with balm essence: Completely soak the place with balm essence and wipe it with dry cloth after 15 minutes. If dirt is difficult to remove, you can prolong the time of balm essence immersion, and then rub hard until wiped.

2. Hair dryer heating glue mark: Turn on the hair dryer to the maximum heat, blow on the tape mark for a while, let it slowly become soft, and then use a hard eraser or soft cloth can easily erase offset. Scope of application: this method is suitable for tape trace is relatively small, and offset printing time is relatively long articles, but the articles should have enough heat resistance.

3. Vinegar white vinegar to remove adhesive method: Use a dry dishcloth dipped in white vinegar or vinegar, completely cover the labeled area, so that it is completely soaked. After soaking for 15-20 minutes, use a dishcloth to gradually wipe off the edge of the sticker.

4. Lemon juice to remove adhesive method: Squeeze lemon juice on the hands with adhesive dirt, repeatedly rub, you can remove adhesive marks.

5. Medical alcohol immersion offset printing: Drop some medical essence on the surface of the offset mark and soak for a while, and then with a soft cloth or paper towel wipe off. Of course, surfaces with tape marks must be resistant to alcohol corrosion to use this method.

6. Use hand cream to remove self-adhesive method: First tear off the printed products on the surface, and then squeeze some hand cream on the top, slowly rub with your thumb, rub for a while can rub the rest of the glue down, is a little slower.